 |
|
|
 |
Titre |
|
| [181] |
|
Abdel Hakim Bendada and M. Lamontagne,
"A new infrared pyrometer for polymer temperature measurement during extrusion molding",
in 7th International Workshop on Advanced Infrared Technology and Applications, (Pisa, Italy), pp. (published in Infrared Physics & Technology, 2004), Sept. 9 11 2003. |
|
|
|
| [182] |
|
Abdel Hakim Bendada, A. Derdouri, M. Lamontagne and Y. Simard,
"Investigation of thermal contact resistance in injection molding using a hollow waveguide infrared pyrometer and a two-thermocouple probe",
Review of Scientific Instruments, vol. 74, pp. 5282-5284, 2003. |
|
|
|
| [183] |
|
Abdel Hakim Bendada, K. Cole, M. Lamontagne and Y. Simard,
"A hollow waveguide infrared thermometer for polymer temperature measurement during injection molding",
Journal of Optics A: Pure and Applied Optics, vol. 5, pp. 464-470, 2003. |
|
|
|
| [184] |
|
Abdel Hakim Bendada, M. Lamontagne and H. Roberge,
"Influence of thermal properties on the sensitivity of thermal wave interferometry for the characterization of plasma-sprayed coatings",
International Journal of Thermophysics, vol. 24, pp. 207-222, 2003. |
|
|
|
| [185] |
|
D. Levesque, M. Choquet, A. Blouin, Abdel Hakim Bendada and J.P. Monchalin,
"Laser ultrasonic system for on-line steel tube gauging and process control",
in First Panamerican Iberian Meeting on Acoustics, (Cancun, Mexico), December 2002. |
|
|
|
| [186] |
|
A. Kipping, A. Garcia-Rejon and Abdel Hakim Bendada,
"The influence of operating conditions on the cooling phase of the extrusion blow molding process",
in ANTEC 2002, Society of Plastics Engineers, (San Francisco, USA), pp. 799-803, May 5-9 2002. |
|
|
|
| [187] |
|
A. Yousefi, Abdel Hakim Bendada and R.W. Diraddo,
"Improved modeling and experimental analysis of the reheat stage in thermoforming",
Polymer Engineering and Science, vol. 42, pp. 1115 1129, 2002. |
|
|
|
| [188] |
|
Abdel Hakim Bendada,
"Approximate solutions to 3D unsteady heat conduction through plane flaws within anisotropic media using a perturbation method",
Modeling and Simulation in Material Science and Engineering, vol. 10, pp. 673-684, 2002. |
|
|
|
| [189] |
|
Abdel Hakim Bendada,
"Sensitivity of thermal-wave interferometry to thermal properties of coatings: application to thermal barrier coatings",
Measurement Science and Technology, vol. 13, pp. 1946-1951, 2002. |
|
|
|
| [190] |
|
Abdel Hakim Bendada,
"Quantitative Inversion and Discontinuity Characterization",
in Chapter 12: Data Processing and Modeling for Infrared and Thermal Testing(X. Maldague & Patrick O. Moore ed.), vol. 3: Infrared and Thermal Testing of Nondestructive Testing Handbook, pp. 273-385, American Society for Nondestructive Testing, 2001. |
|
|
 |
 |
|
|
|
